Your Scorbitron uses a direct connection to your Spike 2 game to receive game information. It requires a special USB NMC cable and USB-A to USB-C adapter provided with your Scorbitron. This document will describe the process for installing that connection.
Locate connector USB connector CN9 on your Spike 2 CPU board. It is located just to the right of the large heat sink. This is the same USB ports used for firmware upgrades.
Note: As with any pinball modification, it is possible that making changes to a Stern pinball game may void the game's warranty and/or may be a violation of the Stern software license. Please consult your manufacturer's information for details.
Insert the supplied USB cable came that came with your Scorbitron. This is special USB NMC cable, it has electronics within it that are required to work with this machine. You can use either USB port:
Put the other end of the USB NMC cable into the USB-A to USB-C adapter provided with your Scorbitron. Insert the USB-C end into Port D of the Scorbitron. Only use Port D for this type of connection:
Your installation of the Scorbitron connection is now complete! At this point, you may provide power to your game and proceed with the next step of the installation, Activating Your Scorbitron.